Conference | M!ND

2023
The 14th International Symposium on NDT in Aerospace (AeroNDT 2023)

Gyeongsang-do,

Busan,

Westin Josun Busan

(2023.11.05.~08.)

단체사진

구도헌

백근태

단체사진

1/4

"Burial depth derivation modeling of submarine cable based on thermal simulation"

- Doheon Koo, Daejin Park, and Hongyun So (Oral)

"Thermal effects decoupling system in PEDOT:PSS based sponge pressure sensor using DNN regression"

- Joohyung Bang, Keuntae Baek, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)

"Fabrication of pressure sensor with artificial cilia for prognostics and health management"

- Keuntae Baek, Joohyung Bang and Hongyun So (Oral)

Korea Society of Mechanical Engineers (KSME) Fall Conference

Gyeonggi-do,

Incheon,

Songdo Convensia

(2023.11.01.~03.)

단체사진

신상훈

김수헌

단체사진

1/17

"3D 프린팅과 머신러닝 기반의 공기 유량 측정 장치"

- Sanghun Shin, Keuntae Baek, Yeongu Choi and Hongyun So (Oral)

"가변형 3D 프린팅 적층 패턴을 이용한 다양한 표면 활용 방안 연구"

- Jaebum Sung, Yeongu Choi and Hongyun So (Oral)

"나선 패턴 재널을 이용한 물-기름 액적 제어"

- Doheon Koo and Hongyun So (Oral)

" TPU 를 활용한 점착성 PDMS 제작 및 평가"

- Sangyeun Park, Minhyeok Kim and Hongyun So (Oral)

"딥러닝 알고리즘 기반 압력 센서의 온도 영향 분리 방법"

- Joohyung Bang, Keuntae Baek, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)

"자기장 기반 마이크로 구조를 활용한 압력센서 개발"

- Keuntae Baek, Joohyung Bang and Hongyun So (Poster)

" 3D 프린팅 기술과 탄성 중합체를 이용해 진딧물을 모사한 소프트 그리퍼"

- Jihun Lee and Hongyun So (Oral)

"TDLAS 의 노이즈 기반 가스셀의 최적 광 경로 예측"

- Minyoung Choi, Sun Choi and Hongyun So (Poster)

"Physiologically compatible PVA/MWCNT-based cross-linked self-healed ionic hydrogel for strain sensor application "

- Animesh Sinha and Hongyun So (Oral)

"3D 프린터와 폴리머를 이용한 저온 환경에서 센서의 정상 작동을 위한 초발수 표면"

- Junho Kim and Hongyun So (Poster)

"Real-time water level control system for industrial boilers using object detection models "

- Jongwon Kim, Byungchan So, Hongyun So, Minjun Kwon and Sewon Kim (Poster)

"3D 프린팅 기술 기반의 신축성을 갖는 저항형 히팅 필름 제작"

- Byungkwon Chun, Joohyung Bang, Junyoung Park and Hongyun So (Poster)

"SWCNT/PEDOT:PSS 기반 전도성 고분자 복합체의 제작 및 특성평가"

- Yeongu Choi, Byungkwon Chun and Hongyun So (Poster)

"3D 프린팅 기반의 마이크로 구조를 이용한 정전용량형 압력 센서의 간단한 제작"

- Minhyeok Kim, Sangyeun Park and Hongyun So (Poster)

"3D Printing-assisted single-pair electrode tactile sensor array"

- Junyoung Park, Woojin Chae, Jimin Yoon and Hongyun So (Poster)

"Fabrication of polymer probes for bump damage-free probing test"

- Sooheon Kim, Minhyeok Kim, Hongyun So and Jungki Jo (Poster)

2023 Korean Sensors Society Fall Conference

Jeolla-do,

Yeosu,

The Ocean resort

(2023.10.11.~13.)

KakaoTalk_20231114_120558178_01

KakaoTalk_20231114_120558178_02

KakaoTalk_20231114_120558178_01

1/2

"Physiologically compatible PVA/MWCNT-based cross-linked self-healed ionic hydrogel for strain sensor application"

- Animesh Sinha, Doheon Koo and Hongyun So (Poster)

"Fabrication and characterization of wearable heater based on SWCNTs/PEDOT:PSS"

- Yeongu Choi, Byungkwon Chun and Hongyun So (Poster)

2023 International Conference on Precision Engineering and Sustainable Manufacturing
(PRESM 2023)

Japan,

Okinawa,

Bankoku Shinryokan

(2023.07.16.~21.)

KakaoTalk_20231005_112129650

1/1

"Facile and Rapid Microfabrication for Functional Surface using Variable Resolution Method"

- Jaebum Sung and Hongyun So (Poster)

Korean Society for Prognostics and Health Management 2023 Conference
(PHM Korea 2023)

Seoul,

The K Hotel

(2023.07.03.~05.)

KakaoTalk_20230705_205451289_03

1/1

"열해석을 이용한 해저케이블 매설 깊이 측정 모델 개발"

- Doheon Koo, Jihun Lee and Hongyun So (Oral)

The Society of Air-conditioning and Refrigerating Engineers of Korea 2023 summer annual conference

Gangwon-do,

Pyeongchang,

Yongpyong resort

(2023.06.21.~23.)

설비공학회

1/1

"A study on the Object Recognition-Based Water Level Control System for Industrial Boilers"

- Jongwon Kim, Byeongchan So, Hongyun So, Minjun Kwon and Sewon Kim (Poster)

Korean Institute of Communications and Information Sciences Summer Conference

Jeju Island,

Ramada Plaza Hotel

(2023.06.21.~24.)

KakaoTalk_20230712_172912227

1/1

"에너지 효율 향상을 위한 질화갈륨 기반 자외선 검출기의 온도 탈동조화 시스템 개발"

- Keuntae Baek, Sanghun Shin, Wanki Park and Hongyun So (Oral)

18th International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2023)

Jeju Island,

Ramada Plaza Hotel

(2023.05.14.~17.)

NEMS1

NEMS2

NEMS1

1/2

"Fabrication of Humidity Sensors by Carbon Nanotube, Graphene Oxide and Nanosilica Composite Membrane"

- Doheon Koo, Jaebum Sung and Hongyun So (Oral)

65th Korean Society of Combustion Spring Symposium

Gangwon-do,

Gangneung

Saint Johns Hotel

(2023.05.11.~13.)

연소1

연소3

연소1

1/2

"난류 확산 화염의 화학발광 계측 및 인공지능을 활용한 당량비 예측 모델"

- Sanghun Shin, Minjun Kwon, Sewon Kim and Hongyun So (Oral)

"포토다이오드 기반 화염계측에 대한 실험적 연구"

- Byeongchan So, Jongwon Kim, Hongyun So, Minjun Kwon and Sewon Kim (Poster)

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

Gyeongsang-do,

Busan

Pukyong National University

(2023.05.10.~12.)

마나1

마나2

마나4

마나1

1/4

"Fabrication of microchannel for fluid direction control using the 3D printer"

- Jaebum Sung, Doheon Koo and Hongyun So (Poster)

"Fabrication of micro-textured surface using viscosity control method under magnetic field"

- Keuntae Back, Joohyung Bang and Hongyun So (Poster)

"Micro-Heater with Hydrophobic Surface for Stable Operation in Low-Temperature Environment"

- Junho Kim and Hongyun So (Poster)

Korean Society of Semiconductor & Display Technology Spring Conference

Jeju Island,

Jeju National University

(2023.05.10.~11.)

반디1

반디2

반디3

반디1

1/3

"탄소 나노튜브, 나노 실리카, 산화그래핀 혼합 막을 활용한 습도 센서 제작"

- Doheon Koo, Jaebum Sung and Hongyun So (Poster)

"PCB 기판 상부 RDL 제작을 위한 전해도금 구리 패턴 제어에 관한 연구"

- Sangyeun Park, Doheon Koo, Yeongu Choi and Hongyun So (Oral)

- 우수논문상 수상

"3D 프린팅을 통한 자연 모사 습기 포착 표면"

- Yeongu Choi, Keuntae Baek and Hongyun So (Oral)

Society of Micro and Nano systems - Korean MEMS (KMEMS) Conference

Jeju Island,

Booyoung Hotel

(2023.03.22.~24.)

KMEMS 1

KMEMS 2

KMEMS 1

1/2

"고분자 경화 조건에 따른 계면간 영향 분석 및 활용 방안 개발"

- Jaebum Sung and Hongyun So (Poster)

"Fabrication of water harvesting surface using 3D printing and biomimetic technology"

- Yeongu Choi, Keuntae Baek and Hongyun So (Poster)

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

Jeju Island,

Jeju Oriental Hotel

(2023.03.22.~24.)

신뢰성1

신뢰성2

신뢰성5

신뢰성1

1/5

"화염 광계측과 인공신경망을 활용한 연소 모니터링 시스템 개발"

- Sanghun Shin, Minjun Kwon, Sewon Kim and Hongyun So (Oral)

"3D 프린팅 표면 패턴이 물-기름 액적 생성에 미치는 영향 분석"

- Doheon Koo and Hongyun So (Poster)

"Fabrication and characteristics of adhesive PDMS film using TPU material"

- Sangyeun Park, Minhyeok Kim and Hongyun So (Poster)

"Fabrication of high sensitivity pressure sensor in the ultra-low pressure range using FDM-type 3D printing layer based cracks"

- Byungkwon Chun, Joohyung Bang and Hongyun So (Poster)

7th IEEE Electron Devices Technology and Manufacturing Conference

Seoul,

Coex

(2023.03.07.~10.)

KakaoTalk_20230310_171129744_01

KakaoTalk_20230310_171129744_02

KakaoTalk_20230310_171129744_01

1/2

"Respiration Sensor Embedded in a Mask for Mouth Breathing Detection"

- Jihun Lee, Junho Kim, Ji-Yong Moon, Seok Hyun Cho and Hongyun So (Poster)

Korean Institute of Communications and Information Sciences Winter Conference

Gangwon-do,

Pyeongchang,

Yongpyong Resorts

(2023.02.08.~10.)

KakaoTalk_20230220_124929800_02

KakaoTalk_20230220_125318944_02

KakaoTalk_20230220_125327835_02

KakaoTalk_20230220_124929800_02

1/4

"화학발광을 이용한 화염 계측 및 인공지능 기반의 당량비 예측"

- Sanghun Shin, Minjun Kwon, Sewon Kim and Hongyun So (Oral)

"농경지 부족 문제 해결을 위한 친환경 식물 재배 시스템 연구"

- Sangyeun Park, Junha Jang, Sangjun Ko, Wanki Park and Hongyun So (Oral)

"SCR 촉매 및 장비 고장을 예방하기 위한 NOx 가상센서 개발"

- Keuntae Baek, Minhyeok Kim, Wanki Park and Hongyun So (Oral)

2022
Korean Institute of Communications and Information Sciences Fall Conference

Gyeongsang-do,

Gyeongju,

Lahan Select Hotel

(2022.11.16.~18.)

KakaoTalk_20221118_151003780

KakaoTalk_20221118_150810775_01

KakaoTalk_20221118_151003780

1/2

"3D 프린팅 기술을 이용한 마찰전기 기반 자체 구동 풍속 센서"

- Byeongchan So, Junho Kim, Wanki Park and Hongyun So (Oral)

Korea Society of Mechanical Engineers (KSME) Fall Conference

Jeju Island,

International Convention Center

(2022.11.09.~12.)

KakaoTalk_20221111_185646948_02

KakaoTalk_20221118_152446359

KakaoTalk_20221118_153503458

KakaoTalk_20221111_185646948_02

1/14

"FCN 기반 딥러닝 모델을 활용한 실내 공기 연령 예측 알고리즘 개발"

- Sanghun Shin, Keuntae Baek and Hongyun So (Oral)

"고분자의 경화 농도와 온도 차이를 통한 계면 내 특성 분석 및 다양한 활용 방안 개발"

- Jaebum Sung and Hongyun So (Oral)

"탄소 나노튜브의 표면 성질에 따른 수용액 내 분산도에 관한 연구"

- Doheon Koo, Jaebum Sung and Hongyun So (Poster)

"자기 제어 판형 어레이 구조를 이용한 액적 제어"

- Sangyeun Park and Hongyun So (Oral)

"DLP 프린터의 레진 점성을 활용한 발수 표면 연구"

- Byeongjo Ko and Hongyun So (Poster)

"Flexible Lattice-sponge based high-performance piezoresistive sensor"

- Joohyung Bang and Hongyun So (Oral)

- 우수논문상 수상

"Decoupling systems of GaN UV detector to separate thermal effects"

- Keuntae Baek, Sanghun Shin and Hongyun So (Poster)

- 우수논문상 수상

"3D 프린팅 기술을 이용한 가역적인 열 반응성 접착 패드 제작"

- Jihun Lee and Hongyun So (Poster)

"3D 프린팅 기술을 이용한 생체 모방 단방향 수송 표면의 성능 분석"

- Minyoung Choi, Sangyeun Park, Sun Choi and Hongyun So (Poster)

- 우수논문상 수상

"Fabrication of programmable-crack based pyramidal pressure sensor using 3D printing technology"

- Byungkwon Chun, Joohyung Bang and Hongyun So (Poster)

"Fabrication of water harvesting surface using 3D printing method"

- Yeongu Choi, Keuntae Baek and Hongyun So (Poster)

"Fabrication of transforming film for water collection inspired by structure of butterfly wings"

- Minhyeok Kim, Sangyeun Park and Hongyun So (Poster)

"Anti-Reflux Diode Inside Ureter Stent Using 3D Printer and Elastomer"

- Junho Kim, Jihun Lee, Byeongchan So, Jungki Jo and Hongyun So (Poster)

Architectural Institute of Korea Fall Conference

Jeju Island,

Phoenix Seopjikoji

(2022.10.26.~28.)

KakaoTalk_20221116_121804332_07

KakaoTalk_20221116_121804332_04

KakaoTalk_20221116_121804332_07

1/2

"시멘트의 성능 향상을 위한 탄소 나노튜브 분산 특성 연구"

- Jaebum Sung, Doheon Koo and Hongyun So (Poster)

Korean Institute of Communications and Information Sciences Summer Conference

Jeju Island,

Grand Hyatt Hotel

(2022.06.22.~24.)

KakaoTalk_20221116_142633753

KakaoTalk_20221116_143953458_02

KakaoTalk_20221116_144013105

KakaoTalk_20221116_142633753

1/4

"3D 프린팅 및 인공지능 기반 유량센서 제작 방법"

- Sanghun Shin and Hongyun So (Oral)

- 한국전자기술연구원 원장상 수상

"저온 환경 내 센서 가동범위 증대를 위한 얼음 형성 지연 표면 제작"

- Keuntae Baek and Hongyun So (Oral)

"3D 프린터를 이용한 동심원 무늬 기반 압력센서 제작 및 성능평가"

- Jihun Lee, Wanki Park and Hongyun So (Oral)

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

Gyeongsang-do,

Busan,

Pukyong National University

(2022.05.18.~20.)

KakaoTalk_20221116_142927542_02

KakaoTalk_20221116_142920688_03

KakaoTalk_20221116_142920688_05

KakaoTalk_20221116_142927542_02

1/4

"3D printing assisted fabrication of micro wall arrays for droplet control using magnetic fields"

- Sangyeun Park, Joohyung Bang and Hongyun So (Poster)

"Microfabrication of magnetically responsive and switchable wettability surface using 3D printing technology"

- Joohyung Bang, Sangyeun Park and Hongyun So (Poster)

"3D 프린팅 기술 기반 생체 모방 단방향 액체 수송 표면 제작"

- Minyoung Choi, Sangyeun Park and Hongyun So (Poster)

Korea Institute for Structural Maintenance and Inspection Spring Conference

Jeolla-do,

Gwangju,

Kimdaejung Convention Center

(2022.04.06.~08.)

IMG_0636

IMG_0635

KakaoTalk_20220407_110211667_01

IMG_0636

1/4

"다기능 콘크리트 제작을 위한 나노 물질 간 영향 분석 및 분산 최적화"

- Jaebum Sung, Doheon Koo and Hongyun So (Oral)

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

Jeju Island,

Jeju Oriental Hotel

(2022.03.23.~25.)

KakaoTalk_20220325_215255594_08

KakaoTalk_20220325_215831393_17

KakaoTalk_20220328_124638391_09

KakaoTalk_20220325_215255594_08

1/4

"3D 프린팅과 얇은 폴리머 막을 확용한 간단한 유량센서 제작 방법"

- Sanghun Shin, et al. (Poster)

"3D 프린팅 표면 패턴을 이용한 물-기름 동축류 채널 제작"

- Doheon Koo and Hongyun So (Poster)

- 우수논문상 수상

2021
Korean Society for Precision Engineering (KSPE) 2021 Autumn Conference

Gyeongsang-do

Busan,

BEXCO

(2021.11.24.~26.)

KakaoTalk_20211220_150536901

1/1

"농도비와 경화 온도를 이용한 고분자 기반 탄성 퓨즈 시스템 제작"

- Jaebum Sung and Hongyun So (Poster)

6th International Conference on Advanced Electromaterials

Jeju island,

Ramada Plaza Hotel

(2021.11.09.~12.)

KakaoTalk_20211116_121351451_02

1/1

"Facile Fabrication of Pressure Sensor with Regular Concentric Circle Patterns Using a 3D Printer"

- Jihun Lee and Hongyun So (Poster)

"Facile Fabrication of Soft Inclinometer Using 3D Printing Method"

Keuntae Baek, Joohyung Bang and Hongyun So (Poster)

Korean Society of Mechanical Engineers (KSME) Fall Conference

Jeolla-do,

Gwangju,

Kimdaejung Convention Center

(2021.11.03.~05.)

KakaoTalk_20211116_131906479_13

KakaoTalk_20211116_144137279

KakaoTalk_20211116_131835147_01

KakaoTalk_20211116_131906479_13

1/6

"국소적 온도 데이터를 활용한 딥러닝 기반의 열화상 이미지 예측 및 온도 모니터링 방법"

- Sanghun Shin, Byeongjo Ko and Hongyun So (Oral)

"3D 패턴이 구현된 열팽창 퓨즈 특성 분석"

- Byeongjo Ko, Sanghun Shin and Hongyun So (Poster)

"Fabrication of wedge-shaped single membrane water-oil separator"

- Sangyeun Park, Jaebum Sung and Hongyun So (Poster)

"3D 프린팅 기술로 형성된 점진적으로 변화하는 미세구조를 활용한 압전저항유형의 굽힘 센서 제작"

- Jihun Lee and Hongyun So (Poster)

"Fabrication of particle sorting lattice surface using 3D printing method"

- Joohyung Bang, Keuntae Baek, Jaebum Sung and Hongyun So (Poster)

"Electrical characterization of lattice-structured chemical sensor"

- Minyoung Choi, Joohyung Bang, Keuntae Baek and Hongyun So (Poster)

Korean Concrete Institute Fall Conference

Gyeongsang-do,

Gyeongju,

Hwabaek International Convention Center

(2021.11.03.~05.)

KakaoTalk_20211116_142955812

KakaoTalk_20211116_142920739

KakaoTalk_20211116_142737417

KakaoTalk_20211116_142955812

1/4

"삼중 나노소재 최적 분산 방안 및 최적 배합비 도출 연구"

- Jaebum Sung, Doheon Koo and Hongyun So (Oral)

Korean Sensors Society Fall Conference

Gangwon-do,

Gangneung,

Lacaisandpine Resort

(2021.10.28.~30.)

KakaoTalk_20211116_122407672

KakaoTalk_20211116_122407672_01

KakaoTalk_20211116_122407672

1/2

"Multifunctional capacitive flow sensor for human respiratory monitoring"

- Sanghun Shin, Gahui Park, Whoiyul Kim and Hongyun So (Poster)

Korean Concrete Institute Spring Conference

Jeolla-do,

Yeosu,

Yeosu EXPO

(2021.05.12.~14.)

KakaoTalk_20210521_141928554_02

1/1

- Jaebum Sung and Doheon Koo(participant)

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

Jeju Island,

Jeju Oriental Hotel

(2021.04.28.~30.)

KakaoTalk_20210629_170018215_04

KakaoTalk_20210629_170018215_03

KakaoTalk_20210629_170018215_01

KakaoTalk_20210629_170018215_04

1/5

"3D 프린팅 기술을 이용한 하이브리드 표면 제작"

- Jaebum Sung, Hoo Min Lee, Gil Ho Yoon, and Hongyun So

(Poster)

"3D 프린팅 기술을 이용한 미세 무늬 초 소수성 표면 제작"

- Sangyeun Park, Jaebum Sung, and Hongyun So (Poster)

"3D 프린터로 제작한 역류방지 요관다이오드의 체외 성능 실험"

- Jihun Lee, Jaebum Sung, Jungki Jo, and Hongyun So

(Poster)

- 우수 논문상 수상

"3D 프린팅 기반의 격자 구조를 이용한 용매 감지 화학센서 제작"

- Minyoung Choi, Joohyung Bang, Keuntae Baek, and

Hongyun So (Poster)

The Society of Micro and Nano Systems - Korean MEMS (KMEMS) Conference

Chungcheong-do,

Buyeo,

Lotte Resort

(2021.04.07.~09.)

KakaoTalk_20210629_151028407

KakaoTalk_20210629_151028407_02

KakaoTalk_20210629_151028407_01

KakaoTalk_20210629_151028407

1/5

"3D 프린터를 활용한 크랙 기반 고성능 스트레인 게이지의 간단한 제작 방법"

- Sanghun Shin and Hongyun So (Poster)

"신축성 있는 폴리머 막 전극을 이용한 열팽창 액추에이터의 제작과 성능 검증"

- Byeong Ko, Sanghun Shin, and Hongyun So (Poster)

"레이저 어블레이션을 이용한 거친 3D 프린팅 필라멘트 제작"

- Seungmin Seo, Sanghun Shin, and Hongyun So (Poster)

2020
The Society of Micro and Nano Systems - Korean MEMS (KMEMS) Conference

Gangwon-do,

Pyeongchang

Phoenix Park

(2020.08.19.~21.)

제목 없음

KakaoTalk_20200928_114411233_02

KakaoTalk_20200928_114411233_07

제목 없음

1/4

"Fabrication of multifunctional porous polymer filter using charcoal particles"

- Jaebum Sung and Hongyun So (Poster)

"마이크로히터를 이용한 질화갈륨 자외선 센서의 감쇠 시간 단축 방법에 관한 연구"

- Sanghun Shin, Jabeum Sung, and Hongyun So (Poster)

"3D 프린팅 기술을 이용한 자연모사 표면 제작"

- Sanghu Han and Hongyun So (Poster)

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

Jeju Island,

Jeju Oriental Hotel

(2020.07.15.~17.)

1/4

"Microfabrication of non-sticky surface using 3D printing technology"

- Jaebum Sung and Hongyun So (Poster)

- 우수 논문상 수상

"Fabrication of 3 dimensional micro-mixer that have different mixing-efficiency as printing angle of 3-D printer"

- Doheon Koo, Sanggyu Kim, Seojin Park, and Hongyun So (Poster)

"Fabrication and characterization of micro drill using 3D printing technology"

- Sangyeun Park, Byeongjo Ko, Heewon Lee, and Hongyun So (Poster)

2019
5th International Conference on Materials and Reliability

Jeju Island,

Masion GLAD Jeju

(2019.11.27.~29.)

KakaoTalk_20191202_125655901_07

KakaoTalk_20191202_125655901_10

KakaoTalk_20191202_125941192

KakaoTalk_20191202_125655901_07

1/4

"Measurement of Continuous Water-level Using Gallium Nitride Ultraviolet Sensor"

- Jaebum Sung and Hongyun So (Oral)

"Multifunctional Polymer Lens for Optical Enhancement of GaN Photodetectors"

- Sanghun Shin and Hongyun So (Oral)

- Best Paper Award

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

Busan,

Pusan university

(2019.05.22.~24.)

KakaoTalk_20190621_180723193

KakaoTalk_20190621_180723862

KakaoTalk_20190621_180724607

KakaoTalk_20190621_180723193

1/4

"Microfabrication of symmetric molds for ultraviolet detection"

- Jaebum Sung and Hongyun So (poster)

"Microfabrication of Cone-shaped Structures for Operation of GaN UV Photodetector at Low Temperature"

- Sanghun Shin and Hongyun So (poster)

- 포토콘테스트 수상

2018
Korean Society of Mechanical Engineers (KSME) Fall Conference

Gangwon-do, Kangwon Land (2018.12.12.~15.)

KakaoTalk_20190519_195354065_06

KakaoTalk_20190519_195354065_09

KakaoTalk_20190519_195354065_13

KakaoTalk_20190519_195354065_06

1/3

"Fabrication of eyeball for omnidirectional UV sensing using 3D printing"

- Jaebum Sung, Sanghun Shin and Hongyun So (poster)

Korean Society of Aeronautical and Space Sciences (KSAS) Fall Conference

Jeju Isiand,

Ramada plaza Hotel

(2018.11.28~12.01)

KakaoTalk_20190519_195354065_20

KakaoTalk_20190519_195740644

KakaoTalk_20190519_195933680

KakaoTalk_20190519_195354065_20

1/3

- Jaebum Sung (participant)

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

Jeju Island,

Jeju University (2018.02.21.~23.)

KakaoTalk_20191010_210229040

KakaoTalk_20191010_210435579

KakaoTalk_20191010_210229040

1/2

"Microfluidic diode using moving plug for rectifying ultra-low Reynolds number flows"

- Jini Hyeon, Sanghun Shin, Dohoen koo, Wooseok Seo, Jengdu Choi, and Hongyun So (poster)

- 우수 학생 논문상 수상

2023 The 14th International Symposium on NDT in Aerospace (AeroNDT 2023)

Korea Society of Mechanical Engineers (KSME) Fall Conference

2023 Korean Sensors Society Fall Conference

2023 International Conference on Precision Engineering and Sustainable Manufacturing (PRESM 2023)

Korean Society for Prognostics and Health Management 2023 Conference (PHM Korea 2023)

The Society of Air-conditioning and Refrigerating Engineers of Korea 2023 summer annual conference

Korean Institute of Communications and Information Sciences Summer Conference

18th International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2023)

65th Korean Society of Combustion Spring Symposium

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

Korean Society of Semiconductor & Display Technology Spring Conference

Society of Micro and Nano systems - Korean MEMS (KMEMS) Conference

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

7th IEEE Electron Devices Technology and Manufacturing Conference

Korean Institute of Communications and Information Sciences Winter Conference

2022 Korean Institute of Communications and Information Sciences Fall Conference

Korea Society of Mechanical Engineers (KSME) Fall Conference

Architectural Institute of Korea Fall Conference

Korean Institute of Communications and Information Sciences Summer Conference

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

Korea Institute for Structural Maintenance and Inspection Spring Conference

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

2021 Korean Society for Precision Engineering (KSPE) 2021 Autumn Conference

6th International Conference on Advanced Electromaterials

Korean Society of Mechanical Engineers (KSME) Fall Conference

Korean Concrete Institute Fall Conference

Korean Sensors Society Fall Conference

Korean Concrete Institute Spring Conference

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

The Society of Micro and Nano Systems - Korean MEMS (KMEMS) Conference

2020 The Society of Micro and Nano Systems - Korean MEMS (KMEMS) Conference

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

2019 5th International Conference on Materials and Reliability

Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference

- 포토콘테스트 수상

2018 Korean Society of Mechanical Engineers (KSME) Fall Conference

Korean Society of Aeronautical and Space Sciences (KSAS) Fall Conference

Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference

2023
The 14th International Symposium on NDT in Aerospace (AeroNDT 2023)

2023 International Conference on Precision Engineering and Sustainable Manufacturing
(PRESM 2023)

Korean Society for Prognostics and Health Management 2023 Conference
(PHM Korea 2023)

2022
Korean Institute of Communications and Information Sciences Fall Conference

2021
Korean Society for Precision Engineering (KSPE) 2021 Autumn Conference

2020
The Society of Micro and Nano Systems - Korean MEMS (KMEMS) Conference

2019
5th International Conference on Materials and Reliability

2018
Korean Society of Mechanical Engineers (KSME) Fall Conference